Maintenance Tips for Your Superpower Pure Sinewave UPS

Microtek’s Superpower Pure Sine Wave UPS is the best inverter UPS when it comes to ensuring uninterrupted power supply and protecting electronics. Engineered using advanced technological standards, this Inverter/UPS is highly efficient and reliable, making it an invaluable asset to any home or office.  

It is therefore recommended that you undertake regular UPS maintenance to ensure that it stays in the best state and to increase its lifespan. Enlisted below are some maintenance tips to ensure that your Superpower Pure Sinewave UPS serves you for the longest time. 

1. Keep the UPS Clean and Dust-Free 

Dust and dirt can build up inside a UPS and eventually cause it to overheat and fail. To ensure optimal performance, place the UPS in a clean, dry environment free from moisture. And to clean the exterior of the UPS, gently wipe it with a soft dry cloth and remove dust.  

For the interiors, you can simply shut off all the components and blow off any dust that might have collected using compressed air. This simple move is helpful in ensuring the optimal functioning of your UPS while avoiding any form of dust from hampering the UPS’ cooling system. 

2. Regularly Test Battery Backup 

One of the special aspects of Superpower Pure Sinewave UPS is the Intelligent Pulse Technology, which helps quick charging and battery life. To take good care of your UPS battery, always carry out battery tests at some interval of time. These tests should be done monthly to confirm the battery's ability to store charge and produce backup power when needed.  

3. Inspect and Replace Batteries When Necessary 

The batteries are the core of any UPS since they supply electric power during a power failure. However, batteries deteriorate with time, which means that its capacity to retain a charge slowly decreases.  

The Superpower Pure Sinewave UPS series is designed for longer battery life however, it is recommended to have periodic battery health check. Look for symptoms like swelling, rust, and/ or dripping. If you observe any of the problems mentioned, make sure to replace the battery.  

4. Utilize the Resettable Circuit Breaker 

The Superpower Pure Sinewave UPS has an in-built resettable circuit breaker, which ensures total safety of the devices connected to the UPS. This breaker safeguards your devices against electrical surges and at times of power outages.  

It is crucial to read about the breaker and know how to reset it and make sure that the checks are done frequently to see whether it is working correctly. Allowing the breaker to overrun or surge may cause harm to both the UPS and other connected equipment. 

5. Monitor UPS Load Capacity 

Operating your UPS with loads that do not exceed what it was designed for is essential for it to have a long life span and offer optimum performance. This UPS is designed to efficiently handle different power loads and even though it is a pure sinewave UPS, it should not be overloaded otherwise it will heat up and the batteries will degrade. It is also worth thinking about increasing the UPS capacity if you want to power more devices so that you don’t overload the device. 

6. Schedule Professional Maintenance 

While DIY maintenance is crucial, arranging professional check-ups of your Superpower Pure Sinewave UPS will show you problems that you cannot see. The professionals conduct an internal check on the UPS and where necessary make corrective adjustments or overhauls to its internal components to ensure it is in its best condition. 

Conclusion 

If practiced, these are some of the things that will help you keep your Superpower Pure Sinewave UPS in its right condition of being efficient and ready to supply your power needs as and when needed.